Safety Classes
Safety classes for safety shoes and occupational shoes.
Safety standards EN ISO 20345:2022 — Safety Footwear
Our safety shoes are certified according to the European standard EN ISO 20345:2011 or EN ISO 20345:2022. The products are marked with CE.
SB
S1
S1P
S1PL
S1PS
S2
S3
S3L
S3S
S4
S5
S6
S7
S7L
S7S
Protective toecap (200J/15000N)
Fully enclosed heel
A
Antistatic properties
E
Energy absorption in the heel area (tested at 20 Joules)
WPA
Water penetration and absorption
WR
Water resistant
Cleated outsole
P
Puncture-resistant outsole (metal insert, 4.5 mm nail test)
PL
Puncture-resistant outsole (non metal insert, 4.5 mm nail test)
PS
Puncture-resistant outsole (non metal insert, 3.0 mm nail test)
Slip resistance on ceramic tile floors with NaLS
S
Shoes marked S have protective toecaps which will withstand 200 J of impact energy and 15 kN of pressure.
SC
Scuff cap resistant to abrasion
Class I
Footwear made from leather and other materials, excluding all-rubber or all-polymeric footwear.
SR
Slip resistant on ceramic tiles with glycerine
Class II
All-rubber (i.e. entirely vulcanised) or all-polymeric (i.e. entirely mouled) footwear.
LG
Ladder Grip
WR
Water-resistant footwear.
FO
Fuel and Oil resistant outsole and midsole
CI
Cold insulation.
M
Metatarsal resistance
HI
Heat insulation.
AN
Ankle protection
ESD
ESD protection ensures that static electricity is discharged. The shoes have a resistance ranging between 0,1 MOhm and 100 MOhm according to ISO IEC 61340.
CR
Cut resistance
Safety standards EN ISO 20345:2011 — Safety Footwear
Our safety shoes are certified according to the European standard EN ISO 20345:2011 or EN ISO 20345:2022. The products are marked with CE.
SB
S1
S1P
S2
S3
S4
S5
Protective toecap (200J/15000N)
Fully enclosed heel
A
Antistatic properties
E
Energy absorption in the heel area (tested at 20 Joules)
WRU
Water-resistant upper
Cleated outsole
p
Penetration-resistant outsole
S
Shoes marked S have protective toecaps which will withstand 200 J of impact energy and 15 kN of pressure.
HI3
Heat insulation performance level 3.
Class I
Footwear made from leather and other materials, excluding all-rubber or all-polymeric footwear.
ESD
ESD protection ensures that static electricity is discharged. The shoes have a resistance ranging between 0,1 MOhm and 100 MOhm according to ISO IEC 61340.
Class II
All-rubber (i.e. entirely vulcanised) or all-polymeric (i.e. entirely mouled) footwear.
SRA
Slip-resistance on ceramic tile floor with Sodium lauryl sulphate solution.
P
Penetration-resistant outsole.
SRB
Slip-resistance on steel floor with glycerol.
HRO
Heat-resistant outsole compound tested at 300˚.
SRC
SRA + SRB.
WR
Water-resistant footwear.
FO
Oil-resistant outsole.
WRU
Water-resistant upper.
A
Antistatic properties
CI
Cold insulation.
E
Energy absorption in the heel area (tested at 20 Joules).
HI
Heat insulation.
Safety standards EN ISO 20347:2012 — Occupational Footwear
Our occupational shoes are certified according to the European standard EN ISO 20347:2012 or EN ISO 20347:2022. The products are marked with CE.
OB
O1
O2
O3
O4
O5
Fully enclosed heel
A
Electrical resistance (between 0.1–000 MegaOhms)
E
Energy absorption in the heel area (tested at 20 Joules)
WRU
Water-resistant upper
O
Shoes marked with an O are not equipped with a protective steel toecap but meet the basic requirements for work shoes.
ESD
ESD protection ensures that static electricity is discharged. The shoes have a resistance ranging between 0,1 MOhm and 100 MOhm according to ISO IEC 61340.
Class I
Footwear made from leather and other materials, excluding all-rubber or all-polymeric footwear.
SRA
Slip-resistance on ceramic tile floor with Sodium lauryl sulphate solution.
P
Penetration-resistant outsole.
SRB
Slip-resistance on steel floor with glycerol.
HRO
Heat-resistant outsole compound tested at 300˚.
SRC
SRA + SRB.
WR
Water-resistant footwear.
FO
Oil-resistant outsole.
WRU
Water-resistant upper.
A
Electrical resistance (between 0.1–1000 MegaOhms).
CI
Cold insulation.
E
Energy absorption in the heel area (tested at 20 Joules).
Vorschriften für Sicherheitsschuhe
Sicherheitsschuhe müssen die Anforderungen der EU-Richtlinien für persönliche Schutzausrüstung erfüllen. Für Produkte, die nach den oben genannten Richtlinien und gemäß der Europäischen CE EN ISO 20345:2011 hergestellt werden, stehen folgende Sicherheitsklassen-Kennzeichnungen zur Verfügung.
Solid Gear Footwear ist Teil der Hultafors Group in Zusammenarbeit mit: Snickers Workwear | Wibe Ladders | Hultafors Tools | Hellberg Safety | Toe Guard | EMMA Safety Footwear | CLC
Weitere Informationen zu den Marken erhalten Sie gern auf Anfrage
